Gas Bills

[Dave]

Gavin,

No DIYer myself butTry unscrewing your water taps, on occasions these tend to get muck in the filter at the end of the tap which reduces the water pressure. If you need any help ( hot water needed for babies ), we are on site at the moment just let us know.

You may also require a new battery.

Dave

[Big Gaz]

Don't know about F1 but For fault F2 Try taken the front cover off by taken out the 2 nobs out un screw the 1 screw next to the nobs, lift up the cover off. find the wirer's that come from the battery's up the right hand side of the boiler to a small brass bolt there may be a other bolt above this one.
 Make sure the small  wire connections are fitted and not slack. on 1 of the brass bolts there will be a very small red buttion this is a restart. Run the hot water tap at the same time press the red buttion. Hope fully this will restart the spark to the boiler. Re fit the cover,
 Hope this helps if it does just leave a Bulmers behind the bar for me the next time I am out,
 Big Gaz

[Gavin]

Dave, thank you very much for the advice and offer.

Big Gaz thank you very much for ywataking the time to type all those instructions.

The news is good I have got hot water. Turned out someone had turned the inlet valve off outside. Lucky enough I was able to access it myself and turn it on. Unfortunately that was after trying every one of the suggestion you have kindly posted. The boiler cover was screwed in to the last, talk about hassle.

Anyway, the wife is off the phone to 'Holidays from Hell' and I can look forward having more than weekend access to the kids in the future!

Thanks once again all.

Gavin

Gavin